Award Winning Zt-2 Model 2010 Wideband Air Fuel Ratio Meter and Datalogging System
New Features,  New Inputs,  New Software,  New Possibilities
 
 

Performance Data:
Air Fuel Ratio/Lambda  RPM  Water, Oil and Transmission Temperatures
Air Intake Temperature  Fuel and Oil Pressures  Boost/Vacuum
Exhaust Gas Temperature Throttle Position

New Hardware Support:

New User2 input with configurable sensor support
LCD with configurable AFR or Lambda display locations
Show User2 data and setup a customized User2 displayed name!
Power for running up to three LCD displays or ZR-2 gauges plus multiple sensors simultaneously
New Oxygen Sensor Harness with improved connector and heat resistant capabilities

Information on additional Zt-2 Wideband features such as linear wideband analog output, warnings support, simulated narrowband output and more can be found at the Zt-2 Product Information Page.

 

Zt-2 Model 2010 Wideband Zt-2 2010 Plus LCD Display Zt-2 2010Plus ZR-2 Multi-Gauge
Includes the Zt-2 Model 2010 Wideband Air/Fuel Ratio Meter, Wideband Oxygen Sensor, Sensor Harness, Signal Harness, PC Serial Cable, Datalogging Software, Installation Instructions and 2 pin EGT connector to retrofit your EGT probe. New data input supports air/fluid temperature sensors, fuel pressure and more! The LCD and ZR-2 Multi-gauge support viewing this new data. New LCD rev 6.1 supports displaying new sensors options: Lambda, AFR, Boost, Vacuum, EGT, User1 Input Voltage, User2 Input Voltage, Air Intake, Water, Oil, Transmission Temperature, Fuel and Oil Pressure.
High contrast LCD is visible even in a direct sunlight and has a peak and hold feature.
New ZR-2 Multi-Gauge displays Air/Fuel ratio or Lambda values, Boost/Vacuum, Exhaust Gas Temperature, and data from the configurable 'User2' input such as User2 Input Voltage, Air Intake, Water, Oil, Transmission Temperature, Fuel and Oil Pressure. The ZR-2 Multi-Gauge has a peak and hold feature. High contrast LEDs are visible even in a direct sunlight.



The Zeitronix Wideband Air/Fuel ratio meter and datalogging system is a high quality, stand-alone system for use with carbureted and electronic fuel injection engines.  Zt-2 Wideband Kits provide the best bang for your buck delivering unmatched quality, features and capabilities for very reasonable prices.  Our system provides the accuracy of a Dyno Air/Fuel reading right in your vehicle as well as the high performance engine parameters needed for proper tuning. Warnings and triggers help you to tune the engine closer to the edge.  Our base system is very easy to install and retails at $279 USD which includes the hardware and the software required to start datalogging and tuning immediately.

For more information on the Zeitronix Zt-2 Wideband Model 2010 please visit the Zt-2 Product Information Page.