Looking for a Round Gauge to display AFR, Lambda, EGT, Boost and Vacuum?   Check out the stylish ZR-1 and ZR-2 gauges from Zeitronix... 


Need an immediate warning system for dangerous engine conditions?
Take a look at the Zeitronix Audio-Visual warning and Trigger (ZAVT) box below...

50 PSI MAP sensor not enough?  Need 75 PSI?  The Zt-2 now supports these "insane" boost levels!

Need just AFR/Lambda?  New for 2008 the Zt-3!
  • Wideband output.
  • Narrowband output.
  • Set your Narrowband switching point.
  • Datalogging output and 3rd part datalogger support.

ZR-1 AFR/Lambda Gauge:
  • Programmable as AFR or Lambda gauge using an on gauge button.
  • Large 0.4" (10mm) digits.
  • Peak and Hold feature.
  • Stylish machined Aluminum bezel with a brushed finish and super slim enclosure
  • High contrast display with BLUE or RED LEDs
  • Zeitronix received a SEMA Show International Product Award for New ZR-1 Wideband AFR Gauge.

 ZR-2 AFR/Lambda Multi Gauge:
  • Outer edge displays one value (such as AFR) while inner digits provide a second display (like EGT)!
  • Display a combination of Wideband AFR, Lambda, Boost, Vacuum and EGT using a simple on gauge button.
  • Large 0.3" (7.5mm) digits
  • Peak and Hold feature.
  • Stylish machined Aluminum bezel with a brushed finish and super slim enclosure
  • High contrast display with BLUE or RED LEDs
Both the ZR-1 and ZR-2 Gauges work with all versions of the Zeitronix Zt-2 Wideband AFR meter and Datalogging System. The ZR-1 and ZR-2 plug directly into the Zt-2 DATA port through a 5 ft (1.5m) cable. A splitter is included allowing simultaneous datalogging and gauge use.

Zeitronix Audio-Visual Warning and Trigger Box
  • 95dB audio buzzer and Bright RED LED
  • Relay Trigger for activating electronic cutoffs (boost or nitrous cutoffs for example)
  • Alarm trigger on EGT, RPM, TPS, User Input, ARF Lean/Rich or a combination of these parameters.
See the web page for compatibility with your current Zt2 system.
System not supporting warnings can be upgraded for only $49 + shipping.

75 PSI MAP Sensors
  • 75 PSI (5 BAR) absolute MAP (Boost) Sensor is now supported by the Zt-2.
  • We added to our product line a 75 PSI MAP sensor. This MAP sensor comes from the same manufacture as our famous 50 PSI MAP and offers the same quality and accuracy.


For a list of these and all of our products please visit us at:
     http://www.zeitronix.com/


All items produced by Zeitronix are made in the USA.
Thank you for your continued interest in Zeitronix!

Sincerely,
Technical Sales Department
sales@zeitronix.com
(310) 833 3450
[M-F 10am to 4pm Pacific Time]
If you prefer not to receive email offers from Zeitronix send us an email and write 'unsubscribe' as the subject.